Cleaning Office Furniture – The Guide on How to Properly Clean your Wood Veneer And Solid Wood Surfaces

Cleaning Office Furniture – The Guide on How to Properly Clean your Wood Veneer And Solid Wood Surfaces

Wooden furniture can be a cherished heirloom or a favourite chair or table, or it could be the cornerstone material used to kit out your office space. Keeping wooden furniture clean and maintaining it can be hard as wood has a tendency of accumulating dust, grease and dirt.

Wood is prone to collecting dirt and grease from the environment. It also has a tendency of slowly losing its sheen due to wear or loss of polish wooden furniture can get easily stained as it has a tendency of absorbing the oils or water thus they can easily stain specially if not polished and cleaned regularly. Laminate and veneer also come with their own set of limitations and instructions on how to properly clean them, which we outline below:

  • Cleaning Laminate Furniture

Maintaining Your Laminate Furniture

First and foremost, you should regularly dust your laminate furniture. Not only will this improve the look of your office, it will also prevent dust from accumulating and potentially aggravating respiratory problems and allergies. It is important to remember that traditional dusting sprays and wood polishes won’t have the same effect on laminate surfaces because they aren’t porous. This means that the cleaner tends to simply build up on the surface and be pushed around without ever absorbing in the material. Excess cleaning can then rub off on your clothing.

To keep your laminate furniture looking great, you will also want to keep it out of direct sunlight. This will reduce any fading effects. Finally, remember what your mother always told you and use a coaster for your drinks. If you place hot or cold drinks directly on laminate surfaces, permanent rings can form and detract from the look of your furniture.

The Best Way to Clean Laminate Furniture

When it comes to cleaning laminate wood furniture, good old soap and water is your best bet. Start with a microfiber cloth and simply dampen the cloth in warm water. As you wipe down the surface, try to move with the grain. In most cases, this will be more than enough to remove any dust and dirt. If necessary, follow up with another dry microfiber cloth to soak up any excess moisture. 

If you need to do some deeper cleaning and tackle stubborn grim, try mixing mild soap and warm water. Instead of using large swiping motions, really focus on scrubbing small areas. You can even try using a light spray of non-ammonia based glass cleaner to help get things clean.

The most important thing to remember is to avoid using ammonia-based cleaners on laminate and veneer surfaces. These chemicals can cause damage and create a cloudy look on the surface. 

  • Protecting Veneer Furniture

Although veneers tend to be less expensive that solid wood options, some of the most famous names in furniture, such as Hepplewhite and Chippendale, used veneer to create truly unique and beautiful works of art. Veneer can offer more design flexibility and opportunities for creativity. It became especially popular in mid-century furniture when teak wood was often used in Danish furniture.

If you have a prized piece of veneer office furniture, you should begin by protecting it from any damage.

Use coasters. Condensation can damage the finish and create a cloudy appearance. If you have water rings, you can rub the area with naptha. This will remove the finish around the damaged area. Follow up with an application of oil or petroleum jelly to completely erase the mark.

The same rule applies for your hot coffee and tea mugs. Exposure to heat can cause veneers to blister. Prevent unnecessary damage mugs. Exposure to heat can cause veneers to blister. Avoid placing any drinks or hot dishes on your furniture in order to prevent damage.

Don’t let spills sit. Veneer is applied using heavy-duty glue, but moisture can break down the glue and cause the veneer to peel off the surface. Prevent moisture from getting underneath the veneer by quickly and thoroughly cleaning up any spills.

The Best Way to Clean Veneer Furniture

When it comes to cleaning veneer furniture, you can apply many of the same rules outline for laminate products. Avoid harsh and abrasive cleaners and rely on simple soap and water. If you want to repair small scratches, you can apply oil polish and rub the area with a soft microfiber cloth until the scratch is no longer visible. Otherwise, avoid the frequent use of wax products to avoid build-up and simply dust the surfaces regularly.

  • Protecting Solid Wood Furniture

A lot of people turn to spray polishes because they smell good and leave wood with a shiny surface. However, it is important to keep in mind that using polish too often can result in a build-up of residue. Just as with laminate and veneer finishes, your best bet is to rely on a microfiber cloth that will actually pick up particles instead of pushing them around and warm water.

If you need to go beyond simple maintenance and give your wood furniture a good cleaning, then soap flakes and warm water should do the trick. Detergents have a tendency to dull wood, so invest in some soap flakes that can be dissolved in water.

For truly grimy wood furniture that has developed a sticky surface, white vinegar is the solution. Place a few drops into a cup of water for a diluted mixture and dip your microfiber cloth in the liquid. Be sure not to soak the wood surface as you clean.

Shopping around for office furniture? Click here to get in touch with us today!

Source credits:


Cover Image Credit: Desk Gurus

Contact Us
close slider
Open chat
Chat to one of our agents